Caterpillar 980C Wheel Loader
From RitchieWiki(Redirected from Caterpillar 980C)
The 980C has a 3406 direct injection turbo, six-cylinder engine producing 270 flywheel horsepower (FWHP). It comes standard with four-wheel oil disk brakes, a sealed loader linkage, auto bucket control, and powershift transmission.
The 980C was manufactured in the USA, with a 63X serial number prefix; in Japan, with a 13B prefix; and in Belgium, with a 2XD prefix.
The 63X has a rollover protection system (ROPS) and a sound-suppressed cab.
In 1984 Caterpillar added a new lift cylinder to increase digging depth, beginning with 63X05188.
In 1984 and 1985 a folded core radiator was added, beginning with 63X05447 and 13B00532.
In 1986 Cat added corporate ROPS, corporate wiring, a three-piece counterweight, as well as a starting and charging system analyzer, beginning with 63X06575.
Caterpillar offered a certified rebuild program with this model. Units beginning with the following serial number run were certified rebuilds: 63X75000 and 13B75000.
The Caterpillar 980C was replaced by the Caterpillar 980F.
Based on data from the sales database of Ritchie Bros. Auctioneers, it is estimated that more than 12,800 Caterpillar 980C wheel loaders have been produced.
|Total = 12,861|