Talk:Contact Us

nice

--John Wayne 18:16, 1 September 2008 (PDT)

Is it possible to be put on an email list to receive notification of upcoming auctions in the Edmonton area...am looking for a gooseneck or car trailer....thank you

--Brad Shimwell 20:49, 24 September 2008 (PDT)

Hi Brad,

If you contact Customer Service at 1-800-211-3983, they can add you to the mailing list so you can receive upcoming auction brochures. Alternatively, please visit www.rbauction.com, and use the Equipment Search box on the left-hand side of the page. If that equipment is coming up in an auction, it will show you when and where it will be sold.

Thanks!

--Dig it! 08:54, 25 September 2008 (PDT)

This is great. It should be an excellent tool. I would like you to consider a dictionary of terms used in our industry. For example Hammer; a hydraulic attachment mounted on an excavator, backhoe, skid steer or boom for use in breaking rock or concrete. There are hundreds of these words that we use in discriptions that could be defined and give a better understanding to everyone.

--Steve Heckman 09:18, 8 November 2008 (PST)

This is a great service. I have been retired for 8 years - where were you when I was working? Now, is there a way to compare spec's of different brands. Thanks for your response

Tim Pearse owlwolf@frontiernet.net

--Tim Pearse 18:52, 1 December 2008 (PST)

I have submitted a PDF file of an article that I believe would be suitable for the Wiki. If it didn't go through and I need tosubmit in a different format please let me. know. Thanks

--Gsitek 14:22, 12 December 2008 (PST)

  Thresher device of a combine
    After a principle in the world it is known and it is used three kinds thresher devices: 1.Thooth, has appeared in the end of XIX century; 2. Scourges, has appeared in beginning XX of a century; 3. Rotor-scourges, has appeared in the end of first half XX of century. 

The veto time they developed but could not dominate, т. е. Each of them has sufficient lacks - the core: damage and lossless grains.

  For the decision of this problem by us it is developed absolutely new a principle thresher the device. rotor type. The analysis of its work shows, that it rather known thresher devices enables:

1. Without loss and damages to thresh any grain crops, except for that to thresh seeds difficultly threshed vegetable cultures; 2. Adjustment thresher the device is not required; 3. To reduce power consumption threshs; 4. The general design of a combine and its mechanisms of transfers Becomes simpler; 5. It is not required to the Combine straw shaked, that the longitudinal length of a combine and its weight considerably will decrease; 6. Cost of manufacturing of a combine Considerably will decrease. For uses of this decision will address Vladimir Zakharevich Miruashvili. The professor the Georgian state University Agriculrural, the author several ten inventions (including beaten the USSR) and nearby hundred scientific works.

    E-mail address: vladimermiruashvili@yahoo.com

Residences, Georgia, of Tbilisi, street Dolidze №132,

The house. Т. 36-30-53. Post to an index 0171 

--Vladimer 17:46, 8 January 2009 (PST)

Dear Sir:

The following construction and survey equipments will be purchased for one project in Bangladesh. It is preferred used equipment but good working condition. The brand is not mandatory but preferable from renowned manufacturer. Please contact by e-mail if you have the collection of these equipments at plpodder@yahoo.com with a copy to mohsin@saadmusa.com .

Thanking you, Yours sincerely, Panna Podder, P.Eng. Project Manager

List of construction equipments:

1. Universal electronic motor portable vibrator for concrete compaction 50-70 mm F tube diameter

2. Transit Mixture (Concrete mixture truck) 5-7 m3 capacity

3. Concrete pump Theoretical displacement of concrete 95m3/h Pumping pressure 13 Mpa Hydraulic system pressure 32 Mpa Diesel Engine type Theoretical pumping distance (Horizontal/Vertical) 380/1600m

4. Excavator

	Hydraulic excavator Model CAT 315B 

5. Concrete batching plant Stationary/ Mobile (Moby-Mix) concrete mixing plant Hourly production rate 30-40 m3

6. Tower crane Hydraulic self raising tower crane Rated Hoist moment 1250 KN-m Hoist weight 8t Working amplitude 60m Height of attached type 163 m Balance weight 14.5t

Pre Cast Pile Driving Equipments

7. Crawler Crane- 55 Ton

8. Mobile Crane- 35 Ton

9. Diesel Hammer , K-35

10. Leader, 600 mm dia, L-100 ft.

11. Prime Mover, 200 HP

12. Long Trailer- 80 ft

List of Survey equipments

1. Pentax total station V-200 series model v-227N Or

     Nikon 502 series DTM-522

2. Nikon AX-2S Auto Level Or

      GL-232 Auto Level

--Anonymous 11:23, 18 January 2009 (PST)

How fantastic is this. Its like taking the lid off a secret society. Now all you need to do is have the manuals attached for download, all for a small fee of course! :)

--Eddie Fongtoy 23:18, 18 January 2009 (PST)

what does 40% undercarriage is good mean? some adds quote 75% 80%. please advise jpcf1@yahoo.com

--jean-pierre fletcher 05:32, 22 January 2009 (PST)

The specs section is very useful. Thank you for this. But this category lacks a lot of machines which users are usually searching for. That is why I recommend you to enrich it and then the website will become much more popular.

Regards,

Olga

--Olga 06:16, 29 January 2009 (PST)

I would like to apply for the territory manager in orlando fl please

--Jerry Rodgers 16:58, 26 February 2009 (PST)

I have ls 58 cable excavator,205 Koehring cable excavator,3 22B s 1)crane 1 crane...soon to be excavator,1 shovel front,,1 old osgoode hoe,1 smith rodley hoe,1 garwood shovelc/w hoe attachement,2 10 B's,the Last 410 Dominion to be built c/w crane boom ,backhoe.1 400 dominion,1bantam truck backhoe ...cable. 3 Lorains .plus more but I'm getting tired thinking about it. come see or call john@jbtrucksnstuff.com

--john brotzel 16:05, 10 March 2009 (PDT)

No specs found on John Deere Tractors 3140, 4850, 4240. where can i find

--Peter 15:35, 4 April 2009 (PDT)

VEUILLEZ NOUS FAIRE PROPOSITION POUR 10 COMPRESSEURS 12 BARS ANNEES 2000 A VOUS LIRE A ABED

--SARL ABED 01:44, 6 April 2009 (PDT)

I need 5units 966f and 936f 5units. quotat best price cif dammam. forward it to my mail mdrafi.mohamedrafi@gmail.com

--mohamed rafi 07:21, 18 April 2009 (PDT)

Under the equipment section there is a spelling error in on of the categories - skip loader. I believe that categorie should read "skid loader"

--Bequip 07:48, 19 April 2009 (PDT)

Actually Bequip there is such thing as a skip loader machine.

--Big Dig 20:51, 19 April 2009 (PDT)

Wow..just created account.

Really nice works...Useful...informative pages...Great....Appreciated...

--Qubtaanh 22:37, 28 April 2009 (PDT)

Need Serial number guide for construction machine such as Caterpillar, Komatsu, Volvo etc. mail me qubtaanh@eim.ae

--Qubtaanh 22:57, 28 April 2009 (PDT)

How do I upload a picture?

--Michael Ellingson 11:50, 4 May 2009 (PDT)

To Upload a picture go to the "Upload File" tab under the Toolbox section on the left side of this page. Click on the browse button to find the file on your computer. If you need further help contact us @ 1-866-266-WIKI

All pictures must be free of copyright.

--Ameliora 16:26, 4 May 2009 (PDT)

Please my email address is adokado2002"yahoo.com Kindly send us your price for tractor/equipment for 4wd/2wd and your company address, Thanks OGSL, Port Harcourt Nigeria

--Adoseh Sunday 06:49, 21 May 2009 (PDT)

Hi Ameliora,

Can you please change my listing back to Toyota Material Handling, U.S.A., Inc.

This is the correct listing for this company. I am currently a Marketing Administrator at TMHU and this title is incorrect. Our National Marketing Manager requested it be "Toyota Material Handling, U.S.A., Inc."

Thanks Again, LiftTruck

--Lifttruck 13:38, 4 June 2009 (PDT)

Dear Lifttruck.

Thank you so very much for contributing to RitchieWiki. I have changed your name back to include the punctuation as you have asked. The reason it was changed initially was because RitchieWiki has its own style guide, which includes removing all punctuation from acronyms with three or more letters.

Thanks so much & please keep contributing. Ameliora.

--Ameliora 15:35, 4 June 2009 (PDT)

Buyer for heavy Duty Construction Equipment to sell to client around the world. afryer@pacbell.net California Northern 209 575 1949

--Alan Fryer 17:03, 8 June 2009 (PDT)

For the past twenty-four years, the Historical Construction Equipment Association has been preserving for public education the history of the construction, surface mining and dredging equipment industries. As part of our work, we are developing an on-line catalog of our extensive archival holdings. You can view this work in progress at http://archives.hcea.net/.

While we are unable to put specifications and so forth for the equipment itself online, the site will include detailed listings of sales and service literature, photographs and so forth about the equipment, from the Otis shovel discussed on your site on forward. We make this information available to researchers by photocopying, as a means of funding our operations.

It will also describe the records in the collections that document the history of manufacturers, dealers, owners and more, and include condensed histories of these firms. There will also be an extensive list of major construction projects, describing the equipment used from research into trade journal articles about them; I have already posted corrections to your site on this matter, concerning Glen Canyon, Hoover and San Luis dams.

I’ve submitted an article about us for the Organizations and Associations section; see http://www.ritchiewiki.com/wiki/index.php/Historical_Construction_Equipment_Association. I see from your site that your equipment information section is mostly focused on equipment from the past forty to fifty years; would it be possible for you to add a link to our Archives page that would cite us as an alternative resource for information?

--Hcea 13:00, 11 June 2009 (PDT)

I am looking for an asphalt tank truck,volume around 10m3.

regards. A Oemrawsingh/Netherlands.00 31 6 510 16 290.

--A Oemrawsingh 06:30, 15 July 2009 (PDT)

I want the price of this drill machinery.please can you help me?you can send it me with email.

--luan 09:00, 6 August 2009 (PDT)

I AM IN CAMEROON AFRICA AND INTERESTED IN PURCHASING FROM YOU. WHAT DO I DO.

MY EMAIL IS zohansltd@yahoo.com or redcomltd@yahoo.com

--ZOH HANSON 03:36, 21 August 2009 (PDT)

ex60wd-2 excavator to buy Your country?

vheh0204 @ yahoo.co.kr

--kim hyeok jung 13:54, 29 August 2009 (PDT)

I bought a 2008 Wanjin Industries 650cc 4x4 Utility Vehicle at your regina sale and a bearing went out of the transmition. Is there any place to get parts? Preferably in Canada

--Lannie Erickson 14:59, 2 September 2009 (PDT)

manfredo enterprise,is a rental company in GHANA. At the moment we will be happy if you can give us the price of any CAT D8R Which is in good condition. preferable 2000/4000/hrs. for more information,you can contact me on this address.manfredo@yahoo.com or 00233249871976.Thank for your cooperation'

--alfred attah kwamla 15:03, 5 September 2009 (PDT)

Do you have auctions in eastern Canada? I live in New Brunswick.

--Francois Richard 18:36, 21 September 2009 (PDT)

Dear Kim Schulz, I am an engineer and working in world no. 1 automobile company, I am interested to get job in your esteem organisation, so you are requested to send me contact mail id where i have to send my resume. My maid id is d.d.joshi@sify.com Thanks D. D. Joshi.

--23:44, 28 September 2009 (PDT)

I recently discovered that a HATACHIE 330 all models and a HATACHIE 350, the weights are WRONG, a 330 x 2.2 metric tons = 72,600# it is listed as 50,000# to 53,500#

--Mike Christian 19:36, 9 October 2009 (PDT)

Sir Would you please send us offer for second hand machine-type caterpillar Track Type Tractor -D6T and D6N, on e-mail: ortex@medianis.net. Number of working hours:3.000-5.000, manufactured year-2000-2008.

--Vesna 04:11, 14 October 2009 (PDT)

Dear Sir, TOP TOP URGENT PLEASE I am writing from Winscope International.

Please kindly give me your quotation price,

delivery terms, data sheet,and availiblity of the following. Kindly include the cost of freight to Nigeria Lagos Victoria Island Account will be prepaid

Please send me your quotation price for the following :

1. VIBRATION BLADE COMPACTOR
 BLADE – SIZE 400/400 

DIESEL PROPELLED

Please your prompt response will be appreciated.

Thanks, Tatiana Okoro Winscope International 4 Matthew street Port Harcourt Nigeria 00 23480 65 88 77 03 winscopeinternational@yahoo.com --TATIANA OKOR 08:33, 26 October 2009 (PDT)

HELLO;; I'M LOOKING FOR A SMALL DISC,, 36-48",, NO PTO,, SO I CAN PULL BEHIND MY QUAD,UTV,, CAN YOU HELP ME,,, WE LIVE IN GRANDE PRAIRIE ALBERTA, CANADA,, 780-876-1054, THANKS,, DONALD SR.

--DONALD GAUDREAULT 08:19, 27 October 2009 (PDT)